How To Install A Ceiling Fan Without Light

Wiring a ceiling fan and light tin can seem like a daunting chore, just information technology doesn't take to be. Pro Tool Reviews gives you lot a visual guide and stride by step instructions on making the best connections for your particular ceiling fan installation. ON a scale of i-x, the level of difficulty on this projection is a 5, though it tin be more complex if you include the ancillary projects such as running wiring through walls, etc.

The chief thing to consider wiring a ceiling fan and light is determining how y'all want that fan to be controlled. For some, that volition be whatsoever combination from no switches (using the included pull chains for powering the fan and/or lite) and having carve up switches for the light and fan.

Having the correct tools will assist the project go smoothly. It also ensures you don't get bogged down trying to utilize, for instance, a razor knifed to strip wires. A pair of actual wire strippers will practise the job more than accurately and nearly 10x faster.

Author'south Note: Codes and Safety Tips
Information technology's always important to follow the local codes in your area when wiring a ceiling fan and calorie-free. Permits may be required for interior electric work. When working with electricity, always remember to turn off the power, test the wiring with an electrical tester (or voltmeter) to ensure the power is off, secure the panel box then no one can accidentally re-appoint power while you lot are working, and consult a professional to ensure you are doing things correctly and within the specifications of your country and local codes. Read all the instructions and condom data that comes with your ceiling fan.

We'll go through each blazon of switching methodology and discuss what each entails in terms of wiring and controlling your ceiling fan/light. The four methods are:

1. Powered ceiling fan and/or light without any switches (no switches)
2. Switching the lite and using the pull concatenation for the fan (Unmarried switch)
3. Using the same switch for switching both the light and fan (Single switch)
4. Switching the light and fan from dissever switches (Two switches)
5. Switching the light and fan from the same switch with ability at the switch (Unmarried switch)

1. Powered Ceiling Fan and/or Light Without Any Switches (No Switches)

We recommend this method when you simply cannot run a switch into the room. It does crave that you have the ability to bring power straight to the fan from a nearby location. It's certainly an acceptable wiring method and the fans all come up with pull string switches to control the fans and low-cal kits. Wiring this type of electrical connectedness looks like this:

As you tin see, this simple connection feeds power to both the fan and (optional) light kit. The ground and neutral wires simply go tied together as y'all'd expect. The power for the fan motor will typically exist black, while most modern-day fans also accept a separate blueish wire that supplies power to the lights. It's important to connect this wire even if you don't plan on using a light kit as it gives the homeowner the opportunity to add together one later on without having to remove and rewire the fan from above.

ii. Switching the Light and Using the Pull Chain for the Fan (Single Switch)

This method and the post-obit are the most commonly used. They merely require a single light switch. Many older homes never gave any idea to wiring up a second switch. Mostly, this happened because homes didn't have a powered ceiling fan. Equally a outcome, many homeowners must use a single switch to command the light and/or both aspects of their ceiling fans. The wiring for this type of electrical connectedness looks like this:

As you tin see, we switched the hot line going to the light kit by inserting the switch. Many people use elementary 12/2 (Romex) with a ground wire to make this loop. If you lot practise this, wrap black electric tape around the exposed white wire. This indicates (to yous or anyone else who works on the circuit in the future) that it is indeed a "hot" wire and not a neutral line.

While we bear witness a small strip of electrical tape, we recommend actually wrapping information technology around all the exposed white wire. Notation that we opted to wire the fan motor directly to the power source. That lets usa employ the fan's pull string to plough it on and off. This also keeps the fan usable regardless of the position of the wall switch. Make your connections for the neutral and ground wires, and you're all ready.

three. Switching the Light AND Fan from the Aforementioned Switch (Single Switch)

This is a slight accommodation of the above method. It switches power for both the fan and the low-cal kit from the wall switch. This lets you turn the fan on and off with the wall switch (along with the light). You don't have to walk over and pull the chain to terminate the fan motor. This wiring method is completely up to you. Some prefer method #2, while others (myself included) typically opt for this method. Here'south how this electrical connexion looks:

Notation that power is fed through the switch. Both the fan motor and the lite kit go their power from the switch. Equally expected, the neutral and grounds are but tied together and all is well.

4. Switching the Light and Fan from Separate Switches (2 Switches)

This is the about versatile fashion to electrically wire a ceiling fan with a light kit. It allows for separate control over both the fan and the low-cal in the room. In that location are too lots of really convenient switches that put this dual command into one groovy little package. Some even requite y'all the ability to dim the lights – definitely a prissy touch! There are endless choices when it comes to combination dimmers/switches y'all tin utilise with your fan or fan/light.

Of course you lot tin always simply wire upward two single pole switches and you're all set. And here is what the electric wiring would look like for this situation:

It looks more than complicated, just don't sweat it. The bones idea is that your ability supply line is feeding both switches. Each switch so feeds either the fan (black wire) or light kit (blue wire). All that's left at this signal is to tie together all the ground wires and neutral wires (respectively). Keep in mind over again that we assumed 12/2 with ground for the lines going to and from the switches, then exist sure to clearly label them as "hot" wires by wrapping blackness electrical tape around the white ends.

While code makes certain stipulations, there are typically different means to accomplish a wiring connectedness. Instance in point, the to a higher place method was shown using standard 12/2 wire. If you opted for 12/3 wire, yous could reach the same dual switch connections with a piffling scrap less piece of work:

What you are doing hither is using the single hot (black) wire to power both the switches. You tin can practice this by jumping a longer length of wire to both switches. Jumping means that y'all strip the insulation away from a small-scale expanse of wire. Make it simply large enough to loop around the hot terminal. You so loop that exposed wire effectually the hot terminal of the first switch. Finally, strip the end and connect that to the second switch. The hot returns are and then the red wire and the white wire which you lot tape black (on both ends) to designate it as a hot wire.

You can also spring the ground wire. This method of jumping wires is nice in that it eliminates the need for wire nuts. Information technology likewise makes for a simpler wiring scheme (and gives you more than room to work in the box!)

Here's a like fashion to practice it using 12/3 wire with wire nuts in lieu of a jumper wire:

five.  Switching the Light and Fan from the Same Switch with Power at the Switch (Single switch)

This is identical to state of affairs #3 in a higher place. Notwithstanding nosotros wanted to outline the wiring differences when the ability is actually at the switch instead of in the ceiling. We observe this method is encountered in roughly fifty percent of the time in older homes. It peculiarly occurs when electric wiring originated in the crawl infinite. Additionally, there is a sort of clean-ness to this method.

It also offers two helpful advantages. First, the wires are consistent. You lot have no re-labeling of neutral wires. Secondly, this method of wiring makes swapping out ceiling fans piece of cake. Cutting power at the switch eliminates all power to the ceiling box. Notation that we nonetheless recommend deactivating the breaker and checking your wires with a voltmeter, but it'south worth noting withal.

Helpful Tips

Be sure to check the power source before outset the job – even if yous've already tripped the breaker. We've seen several cases where more than one power source was routed to a item ceiling box. We got quite a surprise when we reached inside! It's as well of import to annotation that while some ability supplies come up in via the switch (and non from above) the bones methodology described here doesn't change. What does change is that you can safely conciliate the ceiling fan box simply by turning off the switch. This is handy when replacing ceiling fans with a similar model. Still, we notwithstanding recommend shutting downwardly the breaker, lest someone walk in on you and attempt to turn on the lights!

Stripping Wires

When stripping wires, we adopt to use a stripping tool as opposed to a razor blade. In that location are several on the marketplace, from $2 tools that are unproblematic stripping devices to fancier wire strippers that take cutouts for 10/2, 12/two, and 14/two cable.

Don't Use the Included Wire Nuts

Never use the included "wire nuts" that come with ceiling fans. They almost never have a metal inner winding and are ordinarily undersized. That makes them difficult to utilize, if non unsafe. Instead, be sure to grab a small assortment pack at your local abode improvement or hardware store. While typically not necessary, we recommend taping whatever wire nuts later you make those connections. Wire nuts are normally very reliable, but it never hurts to add an extra layer of protection to keep them from ever unwinding. This is just a good habit to get into and costs next to nil in terms of time or coin to implement.

That's All, Folks!

Hopefully, this guide volition go you on your way to installing a ceiling fan and making all of the required electric connections to get information technology up and running smoothly. A ceiling fan makes a great addition to almost any room. Information technology's one of the easiest projects to consummate and really makes an impact in your home. Information technology can also make y'all expect and feel like a real handyman.

Source: https://www.protoolreviews.com/wiring-connecting-ceiling-fan/

Posted by: taylordese1988.blogspot.com

Share this post